Four vertical-module families on one SolarWrap platform — cylindrical street-light, hexagon, circular tube and square — capturing light from 360°, shedding dust and resisting coastal weather, with LiFePO4 storage and MPPT charging built in. Choose the right vertical solar panel for your pole diameter, road width and site: these wrap-around solar street light modules turn any existing pole into a self-charging off-grid lighting system, ideal for tropical-coastal, cyclone-prone and dust-affected corridors where flat panels soiling and low-angle sun reduce conventional PV output.
SOLARWRAP
Aluminium die-cast hexagonal modules for pole-mounted lighting and retrofit applications. IP66, IK08 and modular installation.
Model: Q140
Pmax: 140W
Dimensions: 228 × 200 × 1560 mm
Vmp / Imp: 18V / 36V; 7.78A / 3.89A
SOLARWRAP
Tempered-glass circular modules for compatible pole-mounted solar lighting, camera, signal and custom-lighting systems.
Model: S80
Pmax: 80W
Dimensions: Ø160 × 1040 mm
Vmp / Imp: 6V / 13.33A
SOLARWRAP
Polygonal folding solar panel that wraps PV around the pole, capturing light from 360° while shedding salt, dust and coastal maintenance.
Model: SolarWrap
PV: Polygon folding vertical solar module
Mounting: Pole-mounted cylindrical light
SOLARWRAP
Square-profile vertical PV modules for SolarWrap pole and garden-light configurations, with IP66 protection and MC4 connections.
Model: SQ140
Pmax: 140W
Dimensions: 220 × 220 × 1040 mm
Vmp / Imp: 18V / 36V; 7.78A / 3.89A
The SolarWrap vertical modular system redefines off-grid energy harvesting with 360° capture, self-cleaning surfaces and hurricane-grade resistance — compatible with LiFePO4 battery systems and MPPT charge controllers. OEM/ODM and tender support available. As a factory-direct solar street light manufacturer, E-Able Power engineers each vertical PV module for high-latitude and low-sun winter output, so distributors and contractors can de-risk projects where grid power, trenching or fixed solar-panel orientation are impractical or cost-prohibitive.
Cylindrical and polygonal designs capture sunlight dawn to dusk, increasing daily energy yield by 25–35%.
160 km/h wind resistance and self-cleaning vertical surface for harsh, coastal and typhoon-prone sites.
Compatible with 70–330mm poles and modular assembly for rapid deployment on municipal infrastructure.
A SolarWrap vertical solar street light is an off-grid lighting system that wraps a cylindrical or polygonal photovoltaic module around the pole instead of mounting a flat solar panel on top. This wrap-around solar panel captures light from 360° across the day, so the LED luminaire charges even at low sun angles and on short winter days — ideal for roads, plazas and parkways where conventional flat-panel orientation is not available.
A flat solar panel faces one direction and loses output when the sun is low, dirty or angled away. A cylindrical or polygonal vertical solar module collects sunlight from every side, sheds rain and dust more easily, and delivers roughly 25–35% higher daily energy yield in coastal, high-dust and typhoon-prone regions. It also frees the pole top for the luminaire, CCTV or a decorative cap.
SolarWrap modules are engineered for a universal pole fit across approximately 70–330 mm pole diameters, with modular assembly that mounts quickly onto new or existing poles. They pair with matching solar power poles for municipal roads, highways and commercial developments on a turn-key basis.
SolarWrap systems typically charge a LiFePO4 battery bank through an MPPT charge controller for high conversion efficiency and long cycle life, giving dusk-to-dawn autonomy across 2–5 rainy days depending on the selected battery capacity and LED load. All units are rated IP66 and supported by a 3-year warranty.
Yes. The vertical profile has a low wind load and is rated for 160 km/h wind resistance, with self-cleaning surfaces and corrosion-resistant finishes that perform well in salt-air coastal sites, typhoon-prone regions and industrial atmospheres — reducing maintenance, salt and dust cleaning cost over the system lifetime.
Yes. E-Able Power configures each SolarWrap system factory-direct around your site: pole height and diameter, wind class, lux level, LED output, battery autonomy, mounting and OEM/ODM branding, with DIALux simulation, sizing and pricing supplied within 2–3 business days.
Send your site conditions, lighting requirements or pole specifications for a system engineered to your location — DIALux simulation, sizing and pricing within 2–3 business days.