E-ABLE POWER / ENERGY STORAGE

GCB-E261Cooled Cabinet

GCB-E261 125kW/261kWh liquid-cooled storage cabinet, controlling temperature for sustained high-rate commercial cycling. The sealed cooling loop keeps LFP cells stable through peak shaving and continuous duty.

E-ABLE POWER — PRODUCT DATASHEET
COMMERCIAL ENERGY STORAGE SOLUTIONS
C&I ENERGY STORAGE125kW / 261kWhLIQUID COOLING

GCB-E261 Series | Liquid-Cooled Energy Storage Cabinet

GCB-E261 125kW / 261kWh Liquid-Cooled Energy Storage Cabinet

GCB-E261 is a 125kW / 261kWh liquid-cooled energy storage cabinet built with LFP 314Ah cells. The battery is rated at 832V with a 728-936V voltage range. The cabinet uses liquid cooling with a 50% ethylene glycol aqueous solution, aerosol fire protection and a 10-year warranty.

GCB-E261 125kW 261kWh liquid-cooled energy storage cabinet

Key Specifications at a Glance

Rated Power / Energy 125kW / 261kWh Battery Cell LFP 314Ah
Battery Pack 166.4V / 314Ah Battery Voltage 832V; 728-936V range
Cooling Liquid cooling Protection / Fire IP54 / Aerosol
Standard Current 157A charge / 157A discharge Warranty 10 Years

System Highlights

Liquid-Cooled Thermal Control

The specified cooling method is liquid cooling, using an ethylene glycol aqueous solution at 50%:50% for consistent cell temperature across the pack and stable output in high ambient conditions.

261kWh LFP Storage

LFP 314Ah cells, five battery packs in series, 261kWh rated energy and 0.5P rated charge-discharge rate — long cycle life and low total cost of ownership.

Outdoor Cabinet Protection

IP54 protection, aerosol fire protection, heat and smoke detection, and operation from -20 to 50°C are specified for outdoor commercial deployment.

Technical Specifications — GCB-E261

Category Parameter Specification
System Type / power / energy Liquid-cooled energy storage cabinet / 125kW / 261kWh
Battery Cell / pack / configuration LFP 314Ah / 166.4V 314Ah / 1P260S
Voltage / power / current 832V (5 modules series); 728-936V; 130.5kW; 157A / 157A standard current
Cycle life 8,000 cycles at 90% DOD, EOL 70%
Cabinet Dimensions / weight / protection 970 x 1420 x 2320mm / approximately 3t / IP54
Environment -20 to 50°C; RH <=95%; altitude <2,000m
Cooling / coolant Liquid cooling / ethylene glycol aqueous solution (50%:50%)
Fire protection / detector Aerosol / heat and smoke detection
Warranty Warranty period 10 years

Table 1.0 — GCB-E261 technical specifications. Final configuration, interfaces, operating limits and documentation are confirmed per project.

Frequently Asked Questions

Q: What cooling technology does GCB-E261 use?

The datasheet specifies liquid cooling with a 50%:50% ethylene glycol aqueous solution — delivering more consistent cell temperatures than air cooling, especially at high charge/discharge rates.

Q: What is the rated battery capacity?

The cabinet is rated at 261kWh, with 832V battery voltage (728-936V range) and five battery packs in series, built with LFP 314Ah cells.

Q: What environmental limits are specified?

The specified operating temperature is -20 to 50°C, relative humidity is RH <=95%, and altitude is below 2,000m.

Q: What should be confirmed before order?

Confirm site conditions, grid interface, installation layout and the final technical configuration before project release. E-Able Power engineering provides a complete technical proposal within 2–3 business days.

GCB-E261 FAQ

What is the GCB-E261's rated output or capacity?

The GCB-E261 provides 125kW and 261 kWh of energy.

What battery technology does the GCB-E261 use?

It uses LFP 314Ah.

What voltage and configuration does the GCB-E261 support?

It operates at 832V (728–936V range).

Is the GCB-E261 protected against dust, water and impact?

Rated IP54. It includes Aerosol fire protection. It is built for outdoor use.

How is the GCB-E261 managed in different conditions?

Uses Liquid cooling.

Can the GCB-E261 be configured for a project?

Yes — configuration can be adapted for a project. It carries a 10 years warranty. Contact us with your site and energy or lighting requirements for sizing and a quotation.

Plan a site-appropriate energy-storage system.
Send your load profile, solar plan and project requirements for a source-backed technical proposal.